Uncategorized

When it comes to the installation of LED lights in a basketball court, the different types of basketball courts all have their unique requirements. Therefore, you have to ensure that the lighting in your court (commercial, recreational, residential, or professional) is in line with the set standards. So, before you buy outdoor basketball lights, you need to think about the following factors to help you make the right decision.

Factors to Consider Before Getting LED Basketball Lights

1. Luminous Efficacy

The real measure of a bulb’s efficiency is referred to as luminous efficacy. The luminous efficacy of the light shows you how many lumens are produced for every watt of electricity consumed. Generally, LED lights are better than traditional lights because they have higher luminous efficacy than traditional bulbs. The efficacy ratings of high-quality LED lights are not less than 130 lumens per watt.

The cost of LED bulbs with higher efficiency is higher than those with lower efficiency. However, it is more cost-effective to choose a LED bulb with a higher efficiency since it costs more to upgrade from one with lower efficiency. Generally, these bulbs can give you a rating of 130-180 lumens per watt.

2. Color Temperature

When dealing with LED lights for basketball courts, you must get a light that provides the right color temperature for your court. Thus, you can go for a bulb that provides a color temperature of 5000K which provides the same effect as natural light. LED bulbs have come to stay. So, if you’ve been using metal halide, fluorescents, or HPS, you might want to start considering LED lights for your basketball court.

If you prefer a bulb that provides a warmer color, you can buy the one of 4000K. since HPS lights are around 2300K, buying a LED bulb around 4000K or 5000K will be a good upgrade.

3. Color Rendering Index

The definition of the color of your bulb is greatly affected by the color rendering index. The coloring rendering index of the LED bulb shows you how the bulb will display colors compared to sunlight (regarded as the ideal light source). For example, HID lamps are associate with poor light color and since the light color affects the contrast and clarity of the court, the color rendering index has to be very high. Most basketball LEDs feature an index between CRI 70 to 85 which is very good. However, if you want to pay attention to the details, an index of CRI 80 to 90 will be a better choice.

4. Anti-Glare System

When designing the lighting of your basketball court, another thing you need to consider is the anti-glare feature of the LED light. When the glare is too strong, it can cause a lot of discomfort to the players and the spectators as well. This ultimately affects the vision of the players and can contribute greatly to bad performance on the basketball court.

Conclusion

Therefore, when choosing a LED bulb for your court, make sure it has a good anti-glare system that will make the game enjoyable for both the players and the spectators.

Reading lamps, as the name suggests, are light products specifically designed for reading purposes. Using reading lamps makes reading more effortless and comfortable. It helps reduce eye struggle and resulting health challenges like headaches or impact on your eyesight. The market is packed with a wide range of reading lights. However, LED table lamps or reading lamps have recently become very popular. In this post, we will be looking at the reasons for the popularity of LED reading lamps.

Advantages of LED reading lamps

The popularity of LED reading lamps can be attributed to their numerous advantages. Below are some of these advantages;

1. They are energy efficient

One of the primary advantages of LED lighting technology is that it is highly energy efficient. Compared to other types of lighting technologies, LED lights use up to 70 percent less power. Therefore, one of the main reasons you may want to get LED table lamps is that they do not consume much energy. This means that you can indulge in your favorite novel or book or choice for as long as you like without worrying about the resulting energy bills. If you are not fond of sleeping in the dark, you can also use your LED table or reading lamp as a night light. You can leave it on all night without worrying about power consumption.

2. They have a long life span

As mentioned earlier, you can choose to leave your table or reading light on all night. Naturally, with conventional lamps, doing this would reduce the lifespan of your light since they can only last for up to 30000 hours. This means that you would have to keep replacing the table lamp after a few months. However, with LED reading lamps, you do not have to worry about this. LED lights are designed to last for up to 50000 hours. This means that even if you kept them on for 12 hours every day, they would still last for 11 years. For this reason, LED table lamps are worth the investment.

3. They do not overheat

A table lamp is not like a conventional light bulb. This is because you have to be close to it. This means that if the light were to overheat, you would feel its impact directly. For instance, an overheating LED table lamp would cause the temperature around you to increase hence interfering with your comfort. With LED table lamps, this doesn’t have to be an issue. Since LEDs do not consume a lot of power, they remain cool throughout their use.

4. They are dimmable

Reading under bright lights can cause issues to your eyesight. Too much light can also cause headaches. For this reason, LED reading lights are a perfect choice because you can dim the lights to your comfort.

Conclusion

Additionally, LED lamps are also more eco-friendly than their counterparts. It also helps that they are cheap to maintain. It is worth mentioning that you can use your LED reading lights as sleeping or night lights. When choosing the best LED table lamp, you must consider a product that offers you all the benefits mentioned above.

If you just got a reel for your high-pressure hose, it might look like a huge complexity. In reality, all it takes are a few snaps here and there to get everything running. This article shall be the detailed guide you need in attaching your hose to your reel and in attaching your reel to the surface of your choice.

How to mount your high-pressure hose reel

In mounting your high-pressure hose reel like these in https://giraffetools.com/products/giraffe-pressure-washer-retactable-hose-reel either on a wall or any other flat surface, you should do the following:

• Step 1: Ensure that your water source has a vacuum breaker – a standard safety requirement as they prevent the flow of water with contamination into your clean water supply.

• Step 2: Your water source must be turned off while doing all of this. If you leave your water running through the source you would like to connect the hose to, there will be a lot of wastage.

If you already have a hose wound on the reel and would like to change it, you should fully stretch out the hose until the water coupling becomes visible. You will find this part in the reel’s inner barrel. You could either use your hand or pliers of the right size to do this.

• Step 3: Straighten the brand new hose you would like to install to avoid further bends.

• Step 4: Expose the hose to the sun. Unlike other times, you need sunlight to reach the hose since it is new. The sunlight makes the hose soft and more flexible. You need your hose as flexible as it can get to easily reel it in place.

• Step 5: Insert the rubber into the coupling through its end. Connect the hose from its female end to the coupling using the vinyl siding. Doing this creates a seal that is watertight on the drum of your reel. If the reel comes with its guide opening, then you should pass the hose’s female end through the opening.

• Step 6: Tighten the connection between the reel’s inner drum and the hose’s female end using pliers. You need channel-type pliers for this, however, do not apply too much force as it could break the parts. The water coupling part is easier to damage than the hose’s female end as it is made of rubber.

• Step 7: Here is where you evenly wrap the hose around the reel. To do this, rotate the hose reel handle in the clockwise direction. Moving both the hose and the handle on the reel at the same time might help hasten the process. If you are using an electric hose reel, all you have to do is push the button for retraction and it will automatically reel in the hose.

• Step 8: You need to examine the feeder hose, which links the reel to the faucet and ensure it has no cracks.

• Step 9: If the feeder hose of the faucet has female ends on both sides, ensure they both have vinyl sidings that are in a great condition.

• Step 10: If the connection between the reel drum and the feeder hose is with a hose clamp, then ensure it is tightly clamped around the drum.

While some hose reels have slots for attaching them to the wall, others do not. These types of reels come with foot-holds instead. For such reels, you should find a suitable position where the reel would cause no obstructions. In mounting your reel on the wall, you should ensure all bolts are tightly held in place.

Final thoughts

Pressure hose reels are not as difficult to mount as they seem. All you need is some form of understanding and the manual may or may not provide this. However, you could let this article guide you in mounting your hose reel and getting it to function.

Many of us know about LED lights, but LED panel lights sound new and something different. LED technology becomes very popular and has been used widely because of its power saving. It’s notably gaining ground for its great look and innovative features as well as the design. Without a doubt, LED panel lights come with some drawbacks, but considering its great advantages, you may not see the disadvantages. For more details, you can check on LED panel lights for more clarifications. In this context, we are going to discuss the benefits of LED panel lights.

Benefits of LED Panel Light.

Flexibility Design

They are designed to provide better lighting conditions by using the latest LED technology. LED panels are made of lightweight aluminum. The frame which is made of aluminum is one of the most significant parts of an LED panel. The frame is designed to prevent any form of light leakage. It also helps with heat dissipation. The frame is made of three layers. The one holds the LEDs, while the second hosts the plate guide light, and the diffuser in the third. The role of the diffuser is to allow for even distribution of light.

Good Heat Dissipation

The lights from an LED panel is generally thin. However, it also looks stylish despite the simplicity. Good heat dissipation is also guaranteed because of the frame made of aluminum. The heat sink system also works to allow for high levels of safety.   

Long Life

The life expectancy theory of LED is up to 100000 hours. Theoretically, life will be 27 years. From the U.S Department of energy, they are estimating by 2027 electricity demand would have reduced by one third. Also note that the quick rise in popularity of the LED light panel has led to the shut-down of more than 40 power plant projects.

Environmental Friendly

First note, the process of manufacturing these lighting devices produces almost no or very little pollution. Secondly, this is a green lighting type of technology with no mercury, no radiation making it a perfect blend to the environment. The material used in these LED devices can get recycled, and these characteristics are essential for sustainable economic development and social development.

Control Ability

They can be managed using a wide range of dynamic programs. For instance, the light can be dimmed as it can be dimmed using a single program and CCT through a separate controller as well.

Best Light Quality

The quality of light results from the LED guide plate used to make LEDs offer bright and uniform lighting on connecting to a power supply. The collaboration of the guide plate and the diffuser helps with the creation of evenly distributed lighting. The lighting is also wide and soft hence protecting the eyes from issues like radiation and glare. To build equally distributed, wide and soft lighting. Amazingly, the latest technology allows instant starts without any humming, flickering.

Light Adjustment

Its light can also be adjusted depending on the needs or circumstances. The light adjustment provides and safe light that can guard eyesight. People can look directly at the light without dazzling.

Conclusion

LED lights use about 50 percent less electricity than normal fluorescent and halogens. Its lifespan is the most significant advantage compared to the traditional lighting solution. I urge you to invest more in the good quality LED panel light because it is more durable and offers a better solution.